========================
== StephensVille RV10 ==
========================
Time Capsule of Building a Vans RV-10

conduit and soundproofing

Finished up a couple tasks this weekend which needed to be done before I could rivet on the baggage floor and rear seat floors. Added Dynaliner soundproofing to the rear seat and baggage floors.

Soundproofing and Conduit

The conduit was ordered from CableOrganizer. I wanted a larger diameter than what Vans sells. I went with the one inch. For the point where the conduit exits the rear of the baggage area I used the same CTM-HM cable tie mounts from Terminal Town as used for the AOA tubes at the wingtip.

Conduit Tiewrap Mount