== StephensVille RV10 ==
Time Capsule of Building a Vans RV-10

aileron attach

Attached the ailerons to the wings. Not much to this. A bit of a bear getting some of the washers in, but not too bad.

wing 073

This is the outboard attach bracket. Everything went fine here. Clearance is good all around.

wing 074

Here’s a shot of the pushrod running up from the bellcrank to the aileron on the inboard side.

wing 075

This is the inboard attach bracket. I had a little bit of a clearance issue here with the bracket hitting a rivet when swinging through. Just filed off a little but if the rivet and it’s good.

wing 076