Ok, finally took a first cut at the panel layout. This most likely won’t be the final design. There are many things missing from this initial layout. No switches, indicator lights, etc. So take it as it is.

In place of the AI is a Dynon D10A, but epanelbuilder.com did not have the new seven inch display (EFIS-D100) which is probably what I’ll go with.

Center (top-down) is an Avidyne EX5000, Garmin GMA 340 Audio Panel, Garmin GNS 430 GPS/NAV/COM, and a Garmin SL30 NAV/COM. I want to have room for the Garmin GTX 327 Transponder at the bottom of the same stack, but no room, so for now it’s under the AF-2500 engine monitor. If I go with one of the composite panels available today, then I can place the transponder lower on the center console. We’ll see. To the right of that is the Mountain High 4-Place oxygen system along with the ELT indicator.

I’m sure some of this will change, but I think the majority of these systems will be what I go with.