rv10.stephensville.com

Flying a Vans RV-10.

Wing Root Wiring

With the wings attached, started getting all the wiring finished in the wings. Brad helped by finishing most of the connections at the wing root.

Wired up the Gretz G1000 heated pitot. I wanted to dump the LEDs that came with the pitot for annunciation and instead wanted the annunciation on the VP200. Matt Dralle thankfully did this before I needed it and I followed his lead. You can see his write-up at the following links.

Part 1

Part 2

Part 3

Gretz Pitot Annunciation

Landing lights wired up and tested. These 35W HID lights are awesome. Lots of light and each one draws about 7A when first fired up, but only about 3.5A after on. So having both landing lights on only draws 7A.

Landing Lights Wired