rv10.stephensville.com

Flying a Vans RV-10.

Overhead Console Items

Spent some time the last few weekends getting items mounted in the overhead console before epoxying it to the cabin top.

First, I’m not using air through the overhead, so I wanted to put lights where the air vents would go. I needed to increase the size of the bases to accomodate the lights, so I used a 3 inch piece of PVC wrapped in duct tape as a mold for the epoxy and flox.

Increasing Size of Base For Lights

Increasing Size of Base For Lights

After another layer of epoxy and filler they were big enough for the lights.

Increasing Size of Base For Lights

Increasing Size of Base For Lights

All the items test fit in the overhead. Passenger lights (Aveo Evebeam Touch), Cabin and Baggage Lights from PlaneAround.com, and Oxygen ports for front and back.

Everything Mounted In Overhead Console

Everything Mounted In Overhead Console

Everything Mounted in Overhead Console